Joomla 3.2 Template by webtemplatesbox

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active
 

Disclaimer

THE SOFTWARE AND HARDWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.

For GVI DSR Camera Remote Control I have made three sensors: light, sound and projectile.

They can trigger the camera automatically when events like lightning, loud sounds are detected.

Each sensor is connected to the camera remote control using a stereo cable - male-male jack of 3.5 mm.

Each sensor receives his power (4.5 -5V) through the tip terminal and sends signal to the camera remote control through the ring terminal.

Sensor Connection

5.1. Sound Sensor

This sensor offers a gain (amplification) of 10000x, 100x on each of the two stages of amplification.

The DSLR camera remote control can be programmed to trigger the camera or other devices connected to it when the sound level goes above or below a preset value.

Sensor electronic scheme

Wired Remote Control for Digital Camera Sound Sensor Schematic

Sensor assembled in a standard plastic case.

Wired Remote Control for Digital Camera Sound Sensor Front View

Wired Remote Control for Digital Camera Sensor Top View

5.2. Light Sensor

This sensor offers a gain (amplification) of 10000x, 100x on each of the two stages of amplification.

The DSLR camera remote control can be programmed to trigger the camera or other devices connected to it when the light level goes above or below a preset value.

In Lighting mode if a spike appears it will trigger the camera tanking the average light level as reference for measurement.

Sensor electronic scheme

Wired Remote Control for Digital Camera Light Sensor Schematic

Sensor assembled in a small plastic case.

Wired Remote Control for Digital Camera Light Sensor Front View

5.3. Projectile Sensor

 This sensor detect when a fast ans small object passes between the two photo gates. Because the distance between the photo gates is known, the

DSLR Camera Remote Control when the object will reach a preset distance. Can be used also for free falling objects.

Sensor electronic scheme

Wired Remote Control for Digital Camera Projectile Base

Wired Remote Control for Digital Camera Projectile Detector

Wired Remote Control for Digital Camera Projectile Emitter

Assemble projectile sensor 1

Assemble projectile sensor 2

I also make hotshoe adaptor to connect a flash to the remote (see picture below).

hot shoe is a mounting point on the top of a camera to attach a flash unit.

Flash Connector with HotShoe

5.4 Dripper

 

With the Dripper device used in Drops Menu you can obtain results like those in the following links Water drops collision or Milk Crowns. The DSLR camera Remote Control

has full control of the valves, flash and will trigger the camera at the right time to take a great picture.

Wired Remote Control for Digital Camera Dripping Circuit

 

Water Drops Controller

hostgator

Who's Online

We have 42 guests and no members online

Site Search

Thursday the 21st. Author: Ion GROZEA.